Glass mirror background wall installation method Wenzhou tempered glass
1. The base layer treatment of the background wall begins the construction of the glass background wall. Firstly, the basic treatment of the wall surface is carried out. The putty and the ash are scraped off. The wall surface is required to be smooth, clean and free of floating soil and dust, and coated with a moisture-proof layer for protection. Wenzhou fire glass customization
2. After the base layer of the ninth board is used for processing, in order to make the decorative panel firm and flat, a large core board can be selected to cover the base layer. According to the design size, the glass wall is nailed into the wall of the wall to be installed on the wall of the glass wall. The nail position is required to be evenly installed, and the overall effect of the wall is flat.
3. Fixing the glass plate After the base plate is bottomed, the glass plate is attached. Draw the adhesive area according to the design, apply it evenly on the back of the plaque with glass glue, and stick it on the large core board. For glass parts with a large volume and weight, additional mirror nails can be added according to the situation to ensure a firm installation. Wenzhou tempered glass
4, Wenzhou fire glass custom on the wall TV hook hole wall after installation, for the design of the TV on the wall of the family, should try to let the glass to avoid the weight of the TV. If you want to drill holes in the glass, the operating technology is higher. Therefore, in the design planning, it is recommended to use the glass in combination with other materials, calculate the position of the fixed shelf of the TV, and replace it with a wooden board in the place where it is blocked.
Glass mirror background wall considerations
1, pay attention to the glass background wall light from the design planning, we also design the background wall decoration style, but also pay attention to the use of the living room light, to understand whether the glass material and lighting design is easy to lead to light flooding, balcony light is suitable, etc. Light factor.
2. Note that the background wall coordination is different from other material background walls. The glass city wall must be designed to highlight its style. The design of only one glass is quite unqualified, which makes people feel cold and not warm in the family. The strong reflection of long-term living lights will be exhausting. It is recommended to consult professional furniture designers.
3, the glass parts are convenient to transport and install the background wall to choose the glass, the material should be thick, the glass is required to use more than 8 PCT, so it is recommended to choose the glass parts. If a whole piece of glass is selected, it is not convenient to use, and it will bring a lot of trouble for installation and maintenance.
4, glass drilling slow work out of the fragile glass is fragile, may accidentally crack. Drilling holes in the glass, using special glass drills, inclined mouth feeds and tap water for buffering, the speed can not be too fast. The feed speed should not be too fast, especially when drilling fast, it is easy to break out of the gap. After the drilling, the glass in the drill is removed and the next hole is drilled.
5, the wall should be flat, can be cement wall, gypsum board wall, putty wall, paint wall, wood board wall and so on.
6, according to the drawings, on the ground to fight once, after the fight is complete, then start on the wall stickers.
7, with a neutral glass glue smear a few in the back of each piece of mirror (remember not to fill) + back and then put a few cotton double-sided tape, and then attached to the wall, a glass glue can be 1-2 square .
8, in contrast to the mirror drawings we provide, and in advance in the order of the ground to start the wall stickers, pay attention to the gap between each block is 0.5-1MM (leave a gap is to prevent thermal expansion and contraction damage to the glass pre- Leave the gap), the order is from bottom to top.
For daily cleaning, wipe it with a wet towel or a soft cloth. If it is stained, it can be wiped with a towel, beer or warm vinegar. You can also use the glass cleaner currently on the market. Strong solution cleaning.
1, need to pay attention to in the mirror mirror to avoid moisture, to prevent glass oxidation.
2, keep indoors dry, to avoid moisture, away from the stove, to be isolated from chemical reagents such as acid, alkali, to prevent corrosion and deterioration. Wenzhou fire glass manufacturer
3, need to pay attention to is not to use hard things to touch the surface of the glass, so as not to cause scratches on the glass surface.
How to clean up the art mirror when it hits the smudge?
If it is a conventional stain such as dust, water stains, wipe the art mirror, first wipe the glass frame with a towel, then use a glass to scrape the diluted glass aqueous solution, evenly apply the glass from top to bottom, and then repeat the above process. Use a glass scraper to scrape from top to bottom. Use a dry towel to clean the water marks left on the frame. The water marks on the glass must be scraped with glass, otherwise it will leave a trace on the glass. Or mix the vinegar and water in a ratio of 1:2, put it in a spray, spray it on the glass and wipe it, it will be very clean.
If the surface of the art mirror glass is moldy, the ratio of hydrofluoric acid (HF) to water 1:8 can be adjusted (note: more than 1:8, it will cause damage to the hand), wipe the glass. Note: Be sure to do corrosion protection work, the skin should not touch HF, otherwise it will be severely corroded! After wiping the glass, wipe it again with water and dry the glass. Wenzhou fire glass manufacturer